Plain Plunger for Type B/F/N

For Ring Donuts and 'Old Fashioned' donuts

The Plain plunger makes Ring donuts and Old Fashioned donuts, ready to be coated in your favorite sugars, glazes or icings.

Should you choose a 'Plain' or 'Star' plunger? Both make Ring donuts - the difference between them is in the 'Hole'. The Plain plunger is a bit wacky and unpredictable, and makes center holes with random shapes. The Star plunger is more stable and sensible, with a hole that's generally rounder, and it has a Star pattern around it. So it's up to you!

You will need a cylinder of the same size as your plunger.
If you have two plungers of the same size, you only need one cylinder.
'Old Fashioned' donuts require Old Fashioned donut mix

Plunger sizes, diameter (inches)

1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Plunger sizes, diameter (mm)

38.1, 41.3, 44.5, 47.6 or 50.8

Part Numbers for Type B and Type F

See below LEFT

Part Numbers for Type N

See below RIGHT

Part Numbers (Type B and Type F)
Part Numbers (Type N)

Part Numbers (Type B and Type F)

Part numbers shown at right are for Type B and Type F plungers and cylinders only! Type B and F are used with Open Kettle fryers.

Size (diameter)	Part # (Plunger)	Part # (Cylinder)
1½ inches (38.1 mm)	7SSx1-1/2	0035SSAx1-1/2
1⅝ inches (41.3 mm)	7SSx1-5/8	0035SSAx1-5/8
1¾ inches (44.5 mm)	7SSx1-3/4	0035SSAx1-3/4
1⅞ inches (47.6 mm)	7SSx1-7/8	0035SSBx1-7/8
2 inches (50.8 mm)	7SSx2	0035SSBx2

Smaller and larger sizes may be available for special order.

Part Numbers (Type N)

Part numbers shown at right are for Type N plungers and cylinders only! Type N depositors are used with 616B Fryer and 'Cut-N-Fry' systems.

Size (diameter)	Part # (Plunger)	Part # (Cylinder)
1½ inches (38.1 mm)	N-1007SSx1-1/2	N-1035L-Ax1-1/2
1⅝ inches (41.3 mm)	N-1007SSx1-5/8	N-1035L-Ax1-5/8
1¾ inches (44.5 mm)	N-1007SSx1-3/4	N-1035L-Ax1-3/4
1⅞ inches (47.6 mm)	N-1007SSx1-7/8	N-1035L-Bx1-7/8
2 inches (50.8 mm)	N-1007SSx2	N-1035L-Bx2